How Have Brick Power Supplies Become the Common Language of Modular Design?
Power supplies meeting the specific needs of an application play a significant role in ensuring the proper functioning of the entire system. One might therefore assume that power supply requirements vary greatly depending on the application. Unmanned vehicles, railway systems, defense, and industrial automation systems serve very different markets and may have different input voltages and power requirements. But they often face remarkably similar challenges
Common Power System Design Challenges Across Modern Applications
Limited installation space
Customers expect systems to either become smaller or offer more features in the same housing. The ongoing miniaturization of ICs, controllers, memories, and sensors makes this possible. However, this is not as straightforward when it comes to power supplies. Here, all the energy required by the system is converted, and some losses always occur. Higher efficiencies and therefore lower losses, combined with improved thermal management, are critical decision criteria.
Standard off-the-shelf power supplies have a fixed mechanical format that may be a few millimeters too long, too wide, or too tall to fit into the available space. Or the connection pins and fans may be on the wrong side.
When it comes to devices that must fit into a given space and where optimizing dimensions is a priority, many developers would like more freedom with regard to the power supply.
Short design times
Product life cycles today are significantly shorter than in the past, when products stayed on the market for many years, in some cases even for well over a decade. Many industries report life cycles of 2–3 years or less, and new designs have to be ready for the market in a few months. Again, this is a challenge for the design of your own discrete power supply solution, as the majority of the functionality depends on hardware. New components, controller circuits, and topologies with improved electrical features have to be tested under many operating and environmental conditions.
Highest reliability under harsh environmental conditions
Nowadays, an increasing number of electronic devices are being used in environments where they are exposed to high levels of shock, vibration, dust, extreme temperatures, moisture, or aggressive atmospheres. As well as traditional applications such as aircraft, defense, and railway technology, this now includes many other markets like heavy and chemical industries, mining operations, marine research, agricultural technology, and outdoor applications for telecommunications and renewable energy.
Failures, shutdowns, and repairs can be very costly, and systems are required to operate reliably for years even under these extreme conditions. Instead of developing a custom circuit and testing it under all conditions, wouldn't it make more sense to use components that have been tested by the manufacturer for these conditions in accordance with international standards and have already proven their long-term reliability in hundreds of different applications?
The big question now is: how can a designer meet these challenges when an off-the-shelf standard power supply does not fit into the given space or does not provide the required electrical or mechanical specifications?
Brick power supplies, the ideal choice across applications
For many years, customers have been taking advantage of modular power converters, which allow them to implement their own power supply solutions without in-depth power engineering expertise.
Key components are the so-called “Power Bricks” in quarter, half, and full brick formats (Figure 1):
Figure 1: From left to right: quarter, half, and full brick formats
As shown in Figure 2, all essential elements of a DC/DC converter, including the necessary protection circuits, are already integrated into a compact housing. This makes bricks easy-to-use building blocks offering a high degree of flexibility with regard to mechanical dimensions and thermal management.
Figure 2: Brick power modules integrate key functions of a DC/DC converter
Thanks to their compact design, bricks have smaller form factors and higher power densities compared to discrete solutions. These advantages continue to play an important role in many applications today.
Bricks, building blocks with thousands of variants
A wide variety of input/output voltage and power combinations are available. As shown in Figure 3, P-DUKE’s brick products cover all nominal input voltages from 12V up to 110V. As all modules can work over wider input ranges, some even from 9V to 75V, 40V to 160V, or 14V to 160V, all possible input voltages from 9V to 160V are covered.
Output voltages from 3.3V up to 54V are available with power levels up to 300W.
Figure 3: P-DUKE’s bricks are available with hundreds of input, output, and power combinations up to 300W
In addition, each family is available with different power levels (Figure 4) and different heatsink, EMI filter, and mounting options (Figure 5).
Figure 4: Brick families offer different output power levels for scalable solutions

Figure 5: Heatsink, mounting, and EMI filter options of the HAE75 Half Brick
There are thousands of module variants for customers to choose from. Solutions can be scaled to match the actual requirements of almost all applications.
Low-risk, modular, plug-and-play design
No power expertise is needed; everyone can design their own power supply solution with predictable results. The risk of in-house development is minimized, as manufacturers such as P-DUKE offer complete reference designs for external circuitry. This enables customers to implement new power supply systems in just a few weeks.
According to developers and project managers, spec changes have the greatest negative impact on schedules. This is not the case with modules, as changes to power or output requirements are no longer roadblocks. By replacing or adding a module, the job is done.
Highest flexibility
The modular approach offers a high degree of flexibility, as modules are small and the power supply can be designed to fit into the given space. Developers can focus on a device’s core function without compromising on the power supply.
Highest reliability in harsh environments
Brick modules are fully potted and have passed the most stringent environmental tests (EN61373, MIL-STD-810F for shock, vibration, and other environmental stress factors). Mounting holes allow for a mechanically robust connection to PCBs, heat sinks, or the chassis. Therefore, bricks can be deployed not only in railway, aircraft, or vehicle applications but also in harsh environments everywhere.
Excellent thermal performance through baseplate cooling
Internal power components are mounted on the baseplate, to which all waste heat is conducted. The potting material also helps to transfer heat from other components to the baseplate. This avoids thermal hotspots and makes mounting possible even inside a hermetically sealed housing.
Thermal management is easy, as modules can be mounted on heatsinks, cool plates, heat pipes, or metal cases. Designers only have to check that the baseplate temperature stays within the rated limits, and with good cooling, the highest reliability can be achieved.
Worldwide safety approvals
Trying to pass safety approvals for a system can be a real challenge. This process can be significantly shortened by using brick power modules, as they all have worldwide safety certifications and each module is tested at the end of the production line.
Let’s now look into some examples where customers achieved their design goals by using bricks from P-DUKE.
Application Case Studies: Modular DC/DC Converters in Practice
Simplified design for an automatic train stop device
If a train ignores or misidentifies a stop signal, the brakes have to be activated automatically to prevent a collision. This is an important safety device and has to work under all circumstances, including voltage drops on the input lines.
This customer was updating the existing system to integrate more digital technologies, also for communication between the onboard computing ATC (automated train control) system and other devices mounted on the train.
Requirements
• Input voltages: 24V (14.4V – 33.6V) or 110V (66V – 154V)
• Output voltages: 5V/80W and 24V/80W
• Mounted in a cabinet with convection cooling
• Shock and vibration according to EN61373
Module selection
|
Input voltage |
5V output |
24V output |
Module input voltage range |
|
24V (14.4V – 33.6V) |
QBE100-24S05W-HS5 |
QBE100-24S24W-HS5 |
9V – 36V |
|
110V (66V – 154V) |
QBE100-110S05W-HS5 |
QBE100-110S24W-HS5 |
40V – 160V |
All modules are from the same family with the quarter brick footprint. For easy heat management, the HS5 option was selected: a 1” heatsink attached to the baseplate (Figure 6). The PCB layout and mechanical construction are the same for the 24V and the 110V versions. This saves time for design and approval, as well as money for production and logistics.
Figure 6: Automated train stop realized by using quarter bricks with attached heatsinks
Lightweight, easy-to-cool power for UAVs
This customer designs tethered UAVs to supervise site areas or provide GSM signals for large outdoor events. Since the devices can remain airborne for many hours, energy is transferred via a tether, and the required power is 100W for motors plus 20W for electronics. For safety reasons, the voltage on the tether is limited to 60V, and with longer tethers, it can drop to 36V. Therefore, an onboard DC/DC converter generates a stable 24V bus.
The total weight of the power solution is critical, and the 150W QAE150-48S24, with a weight of only 64g, was selected. The motors need 100W only when they are running. In this case, there is constant airflow around the body of the UAV, which helps to reduce the heatsink size.
The brick is mounted on a small heatsink integrated into the body of the UAV, a solution that solves two challenges:
- Small and light heatsink
- Mechanically robust solution withstanding very high shock and vibration stress

Figure 7: A quarter brick converts the unstable tether voltage into a stable 24V bus inside a UAV
Scalable power for forklifts
For a product family of forklifts available in various configurations, a customer was looking for a power supply converting the voltages of the 24V or 48V traction batteries into a stable 12V bus for onboard electronics and payloads. Between 50W and 280W are needed depending on the vehicle’s size and configuration, and the customer’s first idea was to have a single one-size-fits-all 300W solution.
This created the challenge that, in every vehicle, the numerous plugs, fuses, wiring harnesses, switches, and relays would have to be rated for the maximum available current of 23.3A.
P-DUKE suggested a scalable solution based on the HAE half brick family, available with power levels from 75W up to 300W. The customer selected the 75W, 150W, and 300W modules to cover the most common configurations. There is no need for expensive, oversized components in lower-power vehicles, and the same PCB and mechanical construction can be used for all variants.
Figure 8: The HAE family allows scaling power to the actual needs of the individual forklift
Summary
Brick modules enable customers to design their own power solution in a very short time, with low risk and predictable results, while achieving the highest reliability and operating in the toughest environmental conditions.
What we have not talked about yet is the value of a specialized supplier for modular power. P-DUKE has decades of experience, offers a comprehensive portfolio of DC/DC and AC/DC converter modules in brick and other formats, and commits to very long product lifecycles.
With industry-specific expertise across many markets, including railway, industrial automation, robotics, and medical, the company can provide world-class application engineering support.
Products have a proven record of high field reliability, and all families undergo extensive environmental stress and EMI performance testing.
In case of any questions, please contact P-DUKE at sales@pdukepower.com.
Frequently Asked Questions(FAQ)
Question: I was told that cooling power supplies is difficult. Is this true?
Answer:
Since the waste heat in DC/DC modules is typically dissipated to the housing or the baseplate, they are relatively easy to cool. This can be achieved using heat sinks, cool plates, heat pipes, or even through the device’s housing. Fanless solutions and hermetically sealed systems are therefore also possible. Some products can be ordered with an already attached heatsink and details can be found in the individual datasheets
Question:What about EMI filtering? Isn't this a complicated topic when designing a power supply?
Answer:
When using converter modules, it is easier to find an EMI solution matching the requirements of a specific application.
• EMI performance depends on operating conditions, overall system design and proper PCB layout and wire routing.
• Many modules have undergone the relevant EMC testing and reference designs help reducing the validation workload during system design.
• Recommendations can be found on P-DUKE's website and in case of any questions, P-DUKE’s application engineering is available to help